How do I change my Netgear WPN824's Security?

I tried but I cannot change the security from the MAC Address security (where u manually enter it in from the computer) to WEP. I need WEP because my DS Uses it. Also, is there any way that I can create a custom Password for the WEP? Best and thorough guide will get 5 stars. Can someone write me a step by step. Also, how do I connect my Macbook using the WEP?

ThanksHow do I change my Netgear WPN824's Security?
To Configure the Router with Internet Access



Connect to one of the wireless router/access point's LAN Ethernet ports, turn off its DHCP server, and give the wireless router a static IP on your LAN:



1. Connect a PC directly to a LAN port on the wireless router with an Ethernet cable.

2. Power on the wireless router/access point.

3. Reboot the PC.

4. Log in to the wireless router though a browser. (Usually 192.168.1.1, with User Name = admin and Password = password, unless you changed them from the defaults).

5. Go to the LAN IP menu and disable the wireless access point檚 DHCP server by unchecking Use router as DHCP server.

6. Select LAN IP, and change the IP to 192.168.1.99.

7. Click Apply to save the settings. You will lose the connection to the wireless router/access point , since its IP changed.

8. Log in to the wireless router/access point with the URL: http://192.168.1.99

9. Connect one of the wireless router's Local (LAN) ports to your existing network.



This completes the wireless router/access point configuration.



* You can now log in to the wireless router/access point at its new address of http://192.168.1.99 and configure wireless features such as WEP and Access Control List

* UPnP, DMZ, Port Forwarding, and Port Triggering are not used on the wireless router/access point, and it doesn't matter how they are configured.



1. Configure the LAN IP address to be within the same subnet as your PCs.

o Take care not to use an IP address already being used.

o Limit the number of addresses in the DHCP range and assign an IP address outside of the range to the router you want to use as the Access Point.

2. Disable DHCP on the wireless router/access point.

3. Connect one of the LAN ports on the wireless router/access point to a LAN port on the Router.

4. Configure the SSID and any security settings on the wireless PCs to match the wireless router/access point's SSID and security settings.



a. SSIDs must be the same on all wireless devices. (These are case-sensitive: netGEAR is not the same as NETGEAR.)

b. Tip: Make sure the wireless PCs can connect before configuring WEP, WPA-PSK, or other wireless encryption.





Can't help you with the macbook, check apple's website?